AV100 & AV102 Functions
Power ON = 4 BLUE LED flashes
Power OFF = 4 Amber/Orange LED flashes
Volume Up: Amber/Orange LED quickly blinking 4 times
Volume Down: BLUE LED quickly blinking 4 times
MUTE: Amber/Orange & BLUE simultaneously blinking
Accuvoice 1 = Amber/Orange than BLUE LED immediately appears
Accuvoice 2- 6 = BLUE LED blinks 2 through 6 times depending on which Accuvoice setting you are set on.
Auto Standby/Auto On/Off:
While the speaker is OFF Press and hard hold the power button at least 5 seconds.
Amber/Orange to BLUE LED blinking = Turns ON feature
BLUE to Amber/Orange LED blinking = Turns OFF feature
Firmware Code Readout:
While ON hard hold the Power button for 5 seconds, you will see Amber/Orange & BLUE LEDs flashing 12 times. (Servicing information Only)
AV100 & AV102 Master Reset:
While ON hard hold Power for 5 seconds, you will see Amber/Orange & BLUE LEDs,
immediately release power and hard hold Accuvoice, 4 BLUE LED blinks will appear and it will reset.
AV100 & AV102 Remote Learning
While OFF hard hold the Accuvoice button for 5 seconds, you will see Amber/Orange & BLUE simultaneously blink followed by Amber/Orange blinking indicating step 1:
Step 1: Amber/Orange = Volume Up
Step 2: BLUE = Volume Down
Step 3: Amber/Orange & BLUE simultaneously blinking = Mute Button function
Step 4: BLUE & Amber/Orange alternating colors = Power button function