WOW URC2135 Cable Remote Programming Instructions

These instructions will program your WOW URC2135 cable remote to control your ZVOX. Setup takes three parts: assigning a ZVOX code to the remote’s Audio Device key, locking the volume buttons to the ZVOX, then testing.


ZVOX Codes

Most likely code: 3913

Other ZVOX codes to try: 2332, 2334



Part 1: Assign the ZVOX Code to the Audio Device Key

  1. Make sure your ZVOX is turned on.
  2. Press the B key on the WOW remote. This is the Audio Device key.
  3. Press and hold the OK and MUTE keys at the same time until the POWER key blinks twice.
  4. Using the number keys, enter 3913.


Part 2: Lock the Volume Buttons to the ZVOX

  1. Press and hold the OK and MUTE keys until the POWER key blinks twice.
  2. Press the Volume + key.
  3. Press the B key (blue).


Part 3: Test the Remote

Test the volume buttons to confirm the remote is controlling your ZVOX. If it isn’t, repeat Part 1 using the next code listed above (2332, then 2334).




Still Need Help?

Please contact us at info@zvoxaudio.com or submit a new support ticket.